QUANTA STRATOS S210 Series S210-X22RQ User Manual

CHAPTER TITLE QUANTA SMASH
4-8
Display all system power supply
show /SYS/powerSupply
/SYS
This command provides you the hig-level status of the system
chassis and main power subsystem.
Q&A
Q: I tried to turn system power off by IPMI command “power
off” when there is no response from operating system and sys-
tem could not be shutdown. What is the Chassis Status?
A: The status of ChassisStatus is “powerIsON.”
/SYS/voltage
This command returns a high level version of the system volt-
ages health status.
*The sensor name list depends on the Server Hardware.
Table 4-4: /SYS
P
ROPERTY NAME VALID VALUE ACCESS DESCRIPTION
SystemMAC0 R
Display system MAC0
address
SystemMAC1 R
Display system MAC1
address
ChassisStatus
powerIsOFF
powerIsON
R
PowerIsOFF
indicates the system
power is off
PowerIsON
indicates the system
power is on.
Table 4-5: /SYS/voltage
P
ROPERTY NAME VALID VALUE ACCESS DESCRIPTION
Sensor name list
of vlotage
na
ok
nonCritical
critical
R
na
indicates the status not
available /unknown
(typically because
system power is OFF)
ok
indicates the monitored
parameters within
normal operating ranges
nonCritical
indicates the hardware
outside normal
operating range
critical
indicates the hardware
exceeding specified
ratings

QUANTA STRATOS S210 Series S210-X22RQ Specifications

General

Brand	QUANTA
Model	STRATOS S210 Series S210-X22RQ
Category	Network Storage Server
Language	English