CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-26
Procedure:
1. Choose the Host Configuration as either Automatic or
Manual.
2. Enter the Host Name in the given field if you have chosen
Manual Configuration.
3. Under Register BMC,
Check the option Register BMC to register with this
DNS settings.
Domain Name Configuration
Domain Settings
It lists the option for domain interface as Manual,
v4 or v6 for multiLAN channels.
If you choose DHCP, then select v4 or v6 for
DHCP servers.
Domain Name
It displays the domain name of the device. If the
Domain setting is chosen as Manual, then
specify the domain name of the device. If you
chose Automatic, the Domain Name cannot be
configured as it will be done automatically. The
field will be disabled.
IPv4 Domain Name Server Configuration
DNS Server Settings:
It lists the option for v4 DNS settings for the
device, Manual and available LAN interfaces.
Preferred DNS Server
The DNS (Domain Name System) server v4
address to be configured to the device.
IP Address made of 4 numbers separated by
dots as in "xxx.xxx.xxx.xxx".
Each number ranges from 0 to 255.
First number must not be 0.
Alternate DNS Server
IPv6 Domain Name Server Configuration
Table 4-20: DNS Server Settings Page (Continued)
I
TEM DESCRIPTION
DNS Server Settings
It lists the option for v6 DNS settings for the
device, Manual and available LAN interfaces. If
you choose Manual setting, you have to
configure the DNS Server IP addresses. If you
have chosen DHCP, then you have to select the
interface from which the IP address is to be
received. Example of IPv6 address -
2001:db8:0:101
Preferred DNS
Server, Alternate
DNS Server
Specify the DNS (Domain Name System) server
v6 address to be configured to the device.
Save To save the entered changes.
Reset To reset the entered changes.
To Next Page
Loading...