QUANTA STRATOS S210 Series S210-X22RQ - Page 189

CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-37
Procedure:
1. In the Alert Policy Tab, select the slot for which you have
to configure the Alert policy. That is, In the Event Filter
Entry Page, if you have chosen Alert Policy number as 4,
you have to configure the 4th slot (the slot with Policy
Number 4) in the Alert Policy Tab.
2. Select the slot and click Add to open the Add Alert Pol-
icy Entry Page as shown in the screenshot below.
Figure 4-27. Add Alert Policy Entry Page
3. Policy Entry # is a read only field.
4. Select the Policy Number from the list.
Policy Number Displays the Policy number of the configuration.
Policy Configuration To enable or disable the policy settings.
Policy Set
To choose any one of the Policy set values from
the list.
 0: Always send alert to this destination.
 1: If alert to previous destination was suc-
cessful, do not send alert to this destination.
Proceed to ESMS Functional Specification
For SI v0.11 next entry in this policy set.
 2: If alert to previous destination was suc-
cessful, do not send alert to this destination.
Do not process any more entries in this policy
set.
 3: If alert to previous destination was suc-
cessful, do not send alert to this destination.
Proceed to next entry in this policy set that is
to a different channel.
 4: If alert to previous destination was suc-
cessful, do not send alert to this destination.
Proceed to next entry in this policy set that is
to a different destination type.
Channel Number
To choose a particular channel from the
available channel list.
Destination Selector
To choose a particular destination from the
configured destination list.
Note:
LAN Destination has to be configured - under
Configuration > PEF > LAN Destina-
tion.
Table 4-25: PEF Management - Alert Policy (Continued)
I
TEM DESCRIPTION
Add
To save the new alert policy and return to Alert
Policy list.
Modify To modify the existing entries.
Cancel
To cancel the modification and return to Alert
Policy list.
Table 4-25: PEF Management - Alert Policy (Continued)
I
TEM DESCRIPTION