Radwin 5000

RADWIN 5000 Installaon Guide
August 2023
22
2.3.1 SU: LFF or SFF radio units
1. If you have not already done so, connect the radio to your PC/network and voltage via its “IDU” port.
2. Install the RADWIN Manager applicaon from: hp://www.radwin.com/download, or use the QR code:
3. Log on to the RADWIN Manager as an “Installer” and enter the default IP address (hp://10.0.0.120)
and password: wireless.
4. From the RADWIN Manager, click Congure, then the Management tab.
5. Enter new IP Address, Subnet Mask, and Default Gateway in the indicated elds.
6. Click Apply when done.