Radwin 5000

RADWIN 5000 Installaon Guide
August 2023
71
Figure 90: Input power and data port: JET‐DUO 3/5 GHz, JET AIR, JET PRO, JET‐AIR DUO, and NEO DUO
(“PoE IN” = LAN1)
2. Alternavely, you can use the SFP connecon, which provides management and data connecon only
(no power). It is labeled “LAN” on the JET‐DUO, and JET units, but is not labelled at all on the NEO DUO
and JET‐AIR DUO. In any event, it is referred to as “SFP” in the Web user interface. Note that you must
sll connect a CAT‐5e cable to “PoE In” to provide power: