Rational SCC Series

40
SCC
Edition 10-2008a
1
2
3
4
erase
Prog
new
level
control
copy
change
Roast
Select customer program with central dial
Give program name
(blank - between _ and @ sign)
existing SCC process or program can be copied
and get an index number, i.e. 1; name can be
edited and changed;
Change parameter and / or cooking mode of
program in a non-active program;
con rm change by:
selected program  ashes; con rm delete by
pressing again;
1. Give program name
2. Store
3. select mode, temperature, time (in minutes
and seconds) or core temperature,
4. Additional program with identical mode and
temperature, but different time can be stored
and selected alternating after pre-heating;
new
copy
change
erase
level
control
Programming
1
2
3
4
HACCP
Prog
Prog
Prog
Software
update
Info
update
P, H, I 05, S05
P, H, I 05, S05
Copy customer program to stick
Reload customer programs from stick to unit
Erase customer programs
Download of HACCP-Data
Software updates (Icon only shows when unit detects
valid software on the USB stick
)
Download of service data to stick.
Only shows when USB stick is connected
HACCP
Prog
Prog
Prog
Info
update
Data downloading