Rational SCC Series User Manual

44
SCC
Edition 10-2008a
Intelligent cleaning process: The unit recognizes automatically the likely soiling of the
cabinet using the data of used cooking programs, cooking temperatures and running times.
Cleanjet demand
The customer usage (based on used cooking programs, cooking tem-
peratures and running times) determines the number of red bars in the
display “Cleanjet demand” ==> Intelligent cleanjet process.
If all bars show in red, “Care Control” is displayed.
CDS display
The number of pulses of the CDS sensor determines the number of red
bars in the CDS display.
If the customer always uses the recommended Care tabs when using
cleanjet, the steam generator will stay free of scale and the display will
not change to red bars.
Display Care Control
The combination of the above mentioned information is a measure of the
overall care status of the unit and as such the customers daily cleaning
pattern
Less cleaning (and less usage of care tabs) causes less blue bars.
Should the customer continue the low level cleaning pattern the bars will
start showing in red.
Display Cleanjet +Care Index “G” (10-2008)
Software SCC 04-01-01
CareControl
C
DS
+
=
CareControl
C
DS
CareControl
1
2
3
4
CleanJet
Rinse with water only; cabinet will be dried out;
Rinse with 1 tab for cleaning after steaming;
Rinse with 1 cleaner tab for cleaning in between
cooking cycles; no drying of cabinet;
Cleaning of light soiling with drying of cabinet
Cleaning of medium soiling with drying of cabinet
Cleaning of strong soiling with drying of cabinet
rinse without
Tabs
rinse
interim
cleaning
light
medium
strong
rinse without
Tabs
rinse
interim
cleaning
light
medium
strong
Air Baf e
Care Container

Rational SCC Series Specifications

General

Brand	Rational
Model	SCC Series
Category	Commercial Food Equipment
Language	English