105
SCC
Edition 10-2008a
Download of HACCP data
Output of cooking datas via the interface.
The cooking datas (interior cabinet temperature/core temperature
a. s. o.) automatically are send to the interface when a cooking
mode is active.
Additionally the HACCP datas from the last ten days are stored and
can be downloaded by pressing the download key
To download data proceed as follows
Connect USB-Stick to USB interface of the unit
If the USB stick was identified then the symbol of the stick appears
on the download display
Touch “Start”-key
During the download procedure the hour glass appears and the colour of
the stick changes from blue to red.
If the procedure was successfully completed, “Start” appears again and
at the stick symbol “H” for HACCP data and a tick is shown
The following data can be found on the stick if it is connected to a PC for
reading the HACCP-Data:
On the Stick the folder HACCP can be found.
In this folder two types of files are included.
Typ .txt and file .dat.
HACCP Data are in the file RAG_xx_yy_rlhaccp.txt
haccp
HACCP
Start
12:00
27.03.04
06.04.04
12:00
H
Start
Start
To Next Page
Loading...
Need help?
General
