Raven Hawkeye - Troubleshooting Hawkeye System; Hawkeye Nozzle Control Valve Status LEDs

CHAPTER
8
P/N 016-0171-584 Rev. D 61
CHAPTER 8 TROUBLESHOOTING
HAWKEYE NOZZLE CONTROL VALVE STATUS
FIGURE 1. Nozzle Control Valve LED
TABLE 1. Nozzle Control Valve LED Status Indicator
LED Indicator Rate Color State
Flashing
1 Hz
Green Ready
Blue Actuating Mode (Auto)
Red Loading New Software
Amber Shutdown Alarm Active
5 Hz Amber No ISOBUS Communication
Alternating
1 Hz
Blue/Green Actuating Mode (Manual)
Red/Green Not Calibrated
Amber/Red No ECU Detected or Invalid ISO Name
Amber/Green Ready - Warning Alarm Active
Amber/Blue Actuating Mode - Warning Alarm Active
Solid
- Any Nozzle Control Valve Failure
Status LED