4-12 Raychart 425 Chartplotter
Figure 4-8: SD GPS SET UP Menu
2. Using vertical trackpad movements, select SD MODE.
3. Use horizontal trackpad movements to toggle between
ENABLED and
DISABLED
.
• Select
ENABLED to allow the unit to use SD corrections if available.
• Select
DISABLED to force the unit to calculate a normal GPS fix
with no satellite GPS corrections.
4. Use vertical trackpad movements to select
SATELLITE SELECT and use
horizontal trackpad movements to toggle between
AUTO and MAN-
UAL
.
• Select
AUTO to instruct the unit to select the SD satellite automati-
cally.
• Select
MANUAL to force the unit to use the SD satellite selected.
Note: The
SIGNAL STRENGTH, AZIMUTH and ELEVATION fields are deter-
mined by information from the SD satellite.
5. Press
ENTER to select the new SD Satellite settings and return to the
GPS STATUS window, then press CLEAR again to return to the Setup
functions.
SD GPS SET UP
SD MODE ENABLED
SATELLITE SELECT AUTO
SD SATELLITE NAME AOR-W
SIGNAL STRENGTH 50dB
AZIMUTH 234°
ELEVATION 23°
D4996_2
To Next Page
Loading...
