Renesas RL78/G13

RL78/G13 CHAPTER 11 A/D CONVERTER
R01UH0146EJ0100 Rev.1.00 479
Sep 22, 2011
11.3 Registers Used in A/D Converter
The A/D converter uses the following registers.
• Peripheral enable register 0 (PER0)
• A/D converter mode register 0 (ADM0)
• A/D converter mode register 1 (ADM1)
• A/D converter mode register 2 (ADM2)
• 10-bit A/D conversion result register (ADCR)
• 8-bit A/D conversion result register (ADCRH)
• Analog input channel specification register (ADS)
• Conversion result comparison upper limit setting register (ADUL)
• Conversion result comparison lower limit setting register (ADLL)
• A/D test register (ADTES)
• A/D port configuration register (ADPC)
• Port mode control registers 0, 3, 10, 11, 12, and 14 (PMC0, PMC3, PMC10, PMC11, PMC12, PMC14)
• Port mode registers 0, 2, 3, 10, 11, 12, 14, and 15 (PM0, PM2, PM3, PM10, PM11, PM12, PM14, PM15)
<R>
<R>