ECODRIVE03-SGP-03VRS Description of Diagnostic Messages B…; C…, D… and A 5-43
DOK-ECODR3-SGP-03VRS**-WA01-EN-P
5.4 Operation Status
Hereafter, the possible states of operation are listed alphabetically. These
are shown with the display H1 on the device.
bb
"Ready for Operation"
Refer to description A013 Ready for power on.
Ab
"Drive is Ready"
Refer to description A012 Control and power sections ready for
operation
AC
"Drive Automatic Check"
Refer to description A400 Automatic drive check and adjustment
AE
"Drive Error Reaction"
Refer to description A401 Drive deceleration to standstill
AF
"Drive Enable"
According to the operation mode in use, you will find a more exact
description of the display "AF" under the respective state diagnosis
A101…A800.
AH
"Drive Halt"
Refer to description A010 Drive HALT.
Jb
"Jog Backward"
Refer to description A218 Jog negative.
To Next Page
Loading...
Need help?
General
