Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 17
machine producer according to device type. If machine hardware parameter is not changed,this
parameter should also not change. If machine users need to change，please consult machine
producer.
Machine setup chart
1. Pulse Equiv
Linear axis：The number of pulses of the system needs to send when machine moves every
1mm.Unit：pulse/mm.
Rotary axis：The number of pulses of the system needs to send when machine turns every 1
angle. Unit：pulse/angle.
Calculation methods are detailed in Appendix 7
Setting：Enter ―pulse equiv‖，cursor is in the X-axis pulse equivalent position，press
― ‖/― ‖ to move cursor to where users want to modify.Press ― ‖，input the
new number，and press ― ‖ to save.
2. Table Size
RichAuto system make the table size as the soft limit values, in order to prevent machine
To Next Page
Loading...
