For details about how to set the Switching Input to Wireless Connection, see page
31 "Switching Inputs".
For details about how to automatically switch to the Waiting to Connect screen when
turning on RICOH Monitor, see page 71 "Specifying auto connection in advance".
2. Start RICOH Monitor Multicast for Windows.
When RICOH Monitor Multicast for Windows starts, the search for RICOH Monitors in
the same network starts and the list of such is displayed.
3. Click [Connect] of the RICOH Monitor that you want to connect.
A maximum of 32 RICOH Monitors can be selected.
How to connect wirelessly using a group
You can register multiple RICOH Monitors in one group, and connect wirelessly in bulk
as a group. When you connect a group wirelessly in manual. For details about how to
specify a group, see page 76 "Specifying a RICOH Monitor group for connection".
1. Turn ON all RICOH Monitors to be used and confirm that the Waiting to Connect
screen is displayed.
For details about how to turn ON the machine, see page 29 "Turning On and Off the
Power".
For details about how to set the Switching Input to Wireless Connection, see page
31 "Switching Inputs".
For details about how to automatically switch to the Waiting to Connect screen when
turning on RICOH Monitor, see page 71 "Specifying auto connection in advance".
To Next Page
Loading...
