Ricoh A-C4 - Page 125

20 June 2005 SCANNER UNIT
3-21
Replacement
Adjustment
Completion:
1. Adjust the 1st scanner [A] position with the scanner positioning tools (P/N
A0069104).
2. Secure the 1st scanner with the scanner wire brackets [B] ( x2)
3. Tighten tension bracket [C] ( x1)
4. Secure scanner wire pulley [D] (Allen screw x1)
1) Remove the positioning tools. After sliding the scanner to the right and left
several times, set the positioning tools to check the scanner wire bracket and
tension bracket again.
2) Reassemble the scanner and do the scanner and printer copy adjustments
( 3.21)
B195R921.WMF
[B]
[C]
[D]
[A]
[A]