PHOTOCONDUCTOR UNIT (PCU) 20 June 2005
3-30
3.11 PHOTOCONDUCTOR UNIT (PCU)
3.11.1 PCU
1. Open the front door.
2. Lower the by-pass tray, open the duplex unit, and open the transfer unit right
cover.
3. Spread a sheet of A4/ LTR paper on top of the open front door to catch loose
toner.
4. Loosen [A] ( x 1).
5. Push [B] slightly to the left.
6. Raise the release lever [C].
7. Hold the PCU at [D] and pull it out of the machine.
8. Cover the OPC with a sheet of paper to protect it from light.
Reinstallation
• Open the right cover before you install the PCU in the machine.
• Make sure that the PCU brackets are engaged with the rails before you slowly
push the PCU into the machine.
B195R930.WMF
B195R931.WMF
[C]
[D]
[A]
[B]
To Next Page
Loading...
