SERVICE PROGRAM MODE TABLES 20 June 2005
5-130
5.2.10 SOFTWARE RESET
The software can be reboot when the machine hangs up. Use the following
procedure.
Turn the main power switch off and on.
-or-
Press and hold down together for over 10 seconds. When the machine
beeps once release both buttons. After “Now loading. Please wait” is displayed for
a few seconds the copy window will open. The machine is ready for normal
operation.
5.2.11 SYSTEM SETTINGS AND COPY SETTING RESET
System Setting Reset
The system settings in the UP mode can be reset to their defaults. Use the
following procedure.
1. Press User Tools/Counter .
2. Hold down and then press System Settings.
NOTE: You must press first.
3. When the message prompts you to confirm that you want to reset the system
settings, press Yes.
4. When the message tells you that the settings have been reset, press Exit.
B004S503.WMF
To Next Page
Loading...
