SERVICE PROGRAM MODE TABLES 20 June 2005
5-36
5113 Optional Counter Type
Default Optional Counter Type 001
Selects the type of counter:
0: None
1: Key Card (RK3, 4) Japan only
2: Key Card Down
3: Pre-paid Card
4: Coin Rack
5: MF Key Card
11: Exp Key Card (Add)
12: Exp Key Card (Deduct)
External Optional Counter Type 002
Enables the SDK application. This lets you select a number for the external device for
user access control.
Note: “SDK” refers to software on an SD card.
[0~3/1]
0: None
1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
Disable Copying 5118
Temporarily denies access to the machine. Japan Only
[0~1/1]
0: Release for normal operation
1: Prohibit access to machine
5120 Mode Clear Opt. Counter Removal
Do not change. Japan Only
[0~2/1]
0: Yes. Normal reset
1: Standby. Resets before job start/after completion
2: No. Normally no reset
Counter Up Timing 5121
Determines whether the optional key counter counts up at paper feed-in or at paper
exit. Japan Only
[0~1/1]
0: Feed count
1: No feed count
APS Off Mode 0: Enabled, 1: Disabled 5127*
Selects whether the APS function is enabled or disabled with the contact of a pre-
paid card or coin lock.
To Next Page
Loading...
