SERVICE PROGRAM MODE TABLES 20 June 2005
5-44
Printer Free Run [Disable] [Enable] 5802*
Performs a free run. The scanner scans once and the printer prints for the number
of copies requested. To perform the free run, after selecting “1”, press the Copy
Window to enter copy mode, input the number of copies, and then press the Start
key. To stop the free run, press .
Input Check 5803
Displays the signals received from sensors and switches. (5.2.5)
Output Check 5804
Turns on the electrical components individually for test purposes. (5.2.6)
5807 Option Connection Check
5807 1 ARDF
5807 2 Bank (Paper Tray Unit)
5807 3 LCT
5807 4 Finisher (1000-sheet, Two-Tray
finisher)
Execution will return either a “1” or “0”:
0: Device not connected correctly.
1: Device connected correctly.
5811 Machine No. Setting
This SP presents the screen used to enter the 11-digit number of the machine.
The allowed entries are "A" to "Z" and "0" to "9". The setting is done at the factory,
and should not be changed in the field. DFU
Service Tel. No. Setting 5812*
Use these SP modes to input service and support telephone numbers. Enter the
number and press
Press the key to input a pause. Press the “Clear modes” key to delete the
telephone number.
5812 1* Service Service representative telephone number.
5812 2* Facsimile Fax number of service representative
5812 3* Supply Supplier of consumables
5812 4* Operation Operation support
To Next Page
Loading...
