SERVICE PROGRAM MODE TABLES 20 June 2005
5-70
5863 SMP/FTP/NCP Settings
SMB Default User Name 5863 1
This SP sets the default user name used for SMB sending.
SMB Default Password 5863 2
This SP sets the default password used for SMB sending.
FTP Default User Name 5863 3
This SP sets the default user name used for FTP sending.
FTP Default Password 5863 4
This SP sets the default password for FTP sending.
NCP Default User Name 5863 6
This SP sets the default user name used for NCP sending.
NCP Default Password 5863 7
This SP sets the default password for NCP sending.
Common Key Info Writing 5870
Writes to flash ROM the common proof for validating the device for NRS
specifications.
5870 1 Writing
5870 3 Initialize
Note: These SPs are for future use and currently are not used.
5871 HDD Function Disable DFU
Disables the HDD functions by suppressing all functions that write data to the HDD.
After this SP is executed, the machine must be switched off and on to enable the
setting.
[0~1/1]
0: OFF
1: ON
Note: This SP is intended for use during installation of the Data Overwrite Security
Unit B735 (a new option). For more, see section “1. Installation”.
5872
HDD Overwrite Status Check DFU
SD Card Appli Move 5873
Allows you to move applications from one SD card another. For more, see "1.16.5
Mergining Applications on One SD Card".
5873 1 Move Exec Executes the move from one SD card to another.
5873 2 Undo Exec This is an undo function. It cancels the previous execution.
5875 SC Auto Reboot
This SP determines whether the machine reboots automatically when an SC error
occurs.
Note: The reboot does not occur for Type A SC codes.
5875 1 Reboot Setting The machine reboots automatically when the machine issues an
SC error and logs the SC error code. If the same SC occurs again,
the machine does not reboot.
5875 2 Reboot Type The machine does not reboot when an SC error occurs.
To Next Page
Loading...
