SERVICE PROGRAM MODE TABLES 20 June 2005
5-78
Total Original Jam by Location Display range: 0000~9999
Displays the total number of original jams by location. These jams occur when the
original does not activate the sensors.
Note:
• A “Check In” failure occurs when the paper fails to activate the sensor at the
precise time.
• A “Check Out” failure occurs when the paper remains at the sensor for longer
than the prescribed time and causes a jam.
• The 3rd column in the table below tells you the correct component name used
in the service manual.
Operation Panel Display Service Manual Name
1 At Power On ---
3 Registration Sensor Check In Failure Skew Correction Sensor
4 Nip-in Sensor Check In Failure Interval Sensor
5 Registration Sensor (On Check) ---
6 Relay Sensor (On Check)
7 Inverter Sensor (On Check)
53 Registration Sensor Check Out Failure Skew Correction Sensor
54 Nip-in Check Out Failure Interval Sensor
55 Registration Sensor (Off Check)
56 Relay Sensor (Off Check)
7505*
57 Inverter Sensor (Off Check)
7506* Jam Count by Copy Size
7506 5* A4 LEF
7506 6* A5 LEF
7506 14* B5 LEF
7506 38* LT LEF
7506 44* HLT LEF
7506 132* A3 SEF
7506 133* A4 SEF
7506 134* A5 SEF
7506 141* B4 SEF
7506 142* B5 SEF
7506 160* DLT SEF
7506 164* LG SEF
7506 166* LT SEF
7506 172* HLT SEF
7506 255* Others
Displays the total number of copy jams by paper size.
To Next Page
Loading...
