SERVICE PROGRAM MODE TABLES 20 June 2005
5-88
T:FIN Jobs [0~9999999/ 0 / 1] 8061
These SPs total the finishing methods. The finishing method is specified by the
application.
C:FIN Jobs [0~9999999/ 0 / 1] 8062
These SPs total finishing methods for copy jobs only. The finishing method is
specified by the application.
F:FIN Jobs [0~9999999/ 0 / 1] 8063
These SPs total finishing methods for fax jobs only. The finishing method is
specified by the application.
Note: Finishing features for fax jobs are not available at this time.
P:FIN Jobs [0~9999999/ 0 / 1] 8064
These SPs total finishing methods for print jobs only. The finishing method is
specified by the application.
S:FIN Jobs [0~9999999/ 0 / 1] 8065
These SPs total finishing methods for scan jobs only. The finishing method is
specified by the application.
Note: Finishing features for scan jobs are not available at this time.
L:FIN Jobs [0~9999999/ 0 / 1] 8066
These SPs total finishing methods for jobs output from within the document
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
O:FIN Jobs [0~9999999/ 0 / 1] 8067
These SPs total finishing methods for jobs executed by an external application,
over the network. The finishing method is specified by the application.
806x 1 Sort Number of jobs started in Sort mode. When a stored copy job is set for
Sort and then stored on the document server, the L: counter
increments. (See SP8066 1)
806x 2 Stack Number of jobs started out of Sort mode.
806x 3 Staple Number of jobs started in Staple mode.
806x 4 Bookle
t
Number of jobs started in Booklet mode. If the machine is in staple
mode, the Staple counter also increments.
806x 5 Z-Fold Number of jobs started In any mode other than the Booklet mode and
set for folding (Z-fold).
806x 6 Punch Number of jobs started in Punch mode. When Punch is set for a print
job, the P: counter increments. (See SP8064 6.)
806x 7 Other Reserved. Not used.
To Next Page
Loading...
