1-BIN TRAY UNIT INSTALLATION (B544) 20 June 2005
1-30
16. Remove the scanner stand cover [A] ( x 2).
17. To adjust the height of the scanner stand, first remove [B] ( x 2) to release the
scanner stand [C].
18. Raise the scanner stand until the next set of screw holes in the main frame can
be seen through the screw holes in the scanner stand.
19. Secure the stand ( x 2: , ) and install the arm cover [D] ( x 1).
B544I104.WMF
B544I500.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
