Ricoh A-C4 - Page 54

20 June 2005 PUNCH UNIT INSTALLATION (B377)
1-41
Installation
4. Remove the hopper cover [A] ( x 2).
5. Install the sensor bracket [B] (stepped  x 1).
6. Install the spring [C].
7. Install the 2 mm spacer [D].
8. Install the punch unit [E] ( x 2, stepped  x 1)
B377I101.WMF
B377I104.WMF
[A]
[B]
[C]
[D]
[E]