Troubleshooting When Using the Facsimile Function
42
3
Note
❒ If the “Check whether there are any network problems.” message ap-
pears, the machine is not correctly connected to the network or the settings of
the machine are not correct. If you do not need to connect to a network, you
can specify the setting so this message is not displayed, and then the {Facsim-
ile} key no longer lights. See “Parameter Settings”, General Settings Guide. If
you reconnect the machine to the network, be sure to set “Display” with User
Parameters.
❒ If the paper tray runs out of paper, “
Add paper.” appears on the display, ask-
ing you to add more paper. If there is paper left in the other trays, you can re-
ceive documents as usual, even if the message appears on the display. You
can turn this function on or off with “Parameter Setting”. See “Parameter Set-
tings”, General Settings Guide.
To Next Page
Loading...
