Storing a Document
222
5
F If you have selected [Send & Store], specify the receiver.
If you have selected [Store Only], proceed to step
G
.
G Press the {Start} key.
Note
❒ You can change file names and user names.
Reference
p.38 “Setting the Original Orientation”
“System Settings”, General Settings Guide
Programming a user name
A Press [User Name].
B Press the user name to be programmed.
Press the title key to switch between titles.
To set a non-programmed user name, press [Manual Entry], and then enter the
name. User names entered by pressing [Manual Entry] are not programmed
into the user code.
C Press [OK].
Note
❒ Depending on the security settings, [Access Privileges] might be displayed
instead of [User Name]. For details about setting [Access Privileges], ask the
administrator.
To Next Page
Loading...
