Copier Functions
95
2
❖ Outside
Erases all areas of the copy image other than the area you have selected.
Note
❒ The erase width is set to 10 mm (0.4 inch) as a default. You can change this
setting with Edit under User Tools Menu (Copier and Document Server Features).
❒ The relationship between the original orientation and the erased part is as follows:
A Erased part
B 2-99 mm (0.1"-3.9")
Reference
“Edit”, General Settings Guide
Border Erase (same width)
This mode erases the edge margin of the original image.
A Press [Edit / Stamp].
B Press [Erase].
C Press [Erase Center / Border].
D Press [Same Width].
L original K original
To Next Page
Loading...
