Ricoh Aficio MP 6000 - Specifications

Specifications
273
7
Specifications
❖ Fax Transmission and Reception
❖ Power Consumption
❖ IP-Fax Transmission and Reception
Standard G3
Resolution G3:
8 × 3.85 lines/mm, 200 × 100 dpi (Standard character),
8 × 7.7 lines/mm, 200 × 200 dpi (Detail character),
8 × 15.4 lines/mm (Fine character: optional),
16 × 15.4 lines/mm, 400 × 400 dpi (Super Fine character: optional)
Transmission time G3: 3 seconds at 28,800 bps, Standard resolution
(JBIG transmission: 2 seconds)
Data compression method MH, MR, MMR, JBIG
Maximum original size Standard size: A3L, 11" × 17"
Custom size: 297 × 1200 mm/11" × 47"
Maximum scanning size 297 × 1200 mm/11" × 47"
Print process Printing on standard paper using a laser
Transmission speed G3:
33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 / 19,200 /
16,800 / 14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400bps
(auto shift down system)
Immediate Transmission approx. 360 W
Memory Transmission approx. 320 W
Memory Reception approx. 320 W
Reception approx. 800 W
Network LAN: Local Area Network
Ethernet/10base-T, 100base-TX, IEEE802.11b (wireless LAN)
Scan line density 8 × 3.85 lines/mm, 200 × 100 dpi (Standard character),
8 × 7.7 lines/mm, 200 × 200 dpi (Detail character),
8 × 15.4 lines/mm (Fine character: optional),
16 × 15.4 lines/mm, 400 × 400 dpi (Super Fine character: optional)
Maximum original size Standard size: A3L, 11" × 17"
Custom size: 297 × 1200 mm/11" × 47"
Maximum scanning size 297 × 1200 mm/11" × 47"
Transmission protocol Recommendation: T.38, TCP, UDP/IP communication, SIP
(RFC 3261 compliant), H.323 v2
Compatible machines IP-Fax compatible machines