Copying
132
2
G To specify another page location, repeat steps
E
to
F
.
Up to 100 locations can be specified.
H Select the paper tray that contains the sheet paper to copy the originals.
I When you finish specifying pages, press [OK] twice.
J Place the originals, and then press the {Start} key.
Reference
“Tray Paper Settings”, General Settings Guide
Chapters
The pages you specify with this function will appear on the front of copy sheets.
Important
❒ Before selecting this function, press [Dup./Combine/Series] and select “1
Sided→2 Sided” or “Combine”.
❒ This function can be used only when you use the Duplex (1 Sided→ 2 Sided)
or Combine function.
A Press [Cover/Slip Sheet].
B Press [Designate / Chapter].
C Press [Chapter].
GCSHOWOJ
To Next Page
Loading...
