Copying
58
2
F Enter the vertical size of the copy with the number keys, and then press the
{q} key.
G Press [OK] twice.
H Place the originals, and then press the {Start} key.
Note
❒ To change a length in steps
C
to
F
, press the key you wish to change and
enter the new value.
Sort
The machine assembles copies as sets in sequential order.
Important
❒ To use the Rotate Sort function, two paper trays with paper identical in size
and different in orientation (KL) are required. See “Tray Paper Settings”,
General Settings Guide.
❒ You cannot use the bypass tray with Rotate Sort.
❖ Sort
Copies are assembled as sets in sequential order.
❖ Rotate Sort
Every other copy set is rotated by 90 degrees (KL) and delivered to the copy
tray.
To Next Page
Loading...
