Placing Originals
20
1
SADF Mode
In SADF mode, even when an original is placed page by page in the ADF, each
page is automatically fed when placed.
Important
❒ You should make a setting so that [SADF] is displayed when you press [Special
Original]. See “Input/Output”, General Settings Guide.
A Press [Special Original].
B Press [SADF], and then press [OK] .
C Place one page of an original, and then press the {Start} key.
D When the machine instructs you to place another original, place the next
page.
The second and subsequent pages will be fed automatically without pressing
the {Start} key.
Note
❒ When the Sort, Combine or 1 Sided→2 Sided mode has been set, press the
{q} key after all originals have been scanned.
Reference
“Input/Output”, General Settings Guide
To Next Page
Loading...
