Copier Functions
97
2
E Press the key for the border you want to change and set an erase width with
[n] and [o].
Pressing [n] or [o ] changes the width in increments of 1 mm (0.1 inch).
Pressing and holding down the relevant key changes the width in increments
of 10 mm (1 inch).
If you select to erase the image on the back of the original, press [2 Sided Set-
ting] and [Back].
Erasing the image on the back is valid when you copy 2-Sided originals.
F Press [OK] twice.
G Place the originals, and then press the {Start} key.
Center Erase
This mode erases the center margin of the original image.
A Press [Edit / Stamp].
B Press [Erase].
C Press [Erase Center / Border].
D Press [Erase Center].
To Next Page
Loading...
