Appendix
268
7
Reference
p.121 “Sending at a Specific Time (Send Later)”
p.276 “Maximum Values”
“Entering Text”, About This Machine
Registering a priority function using a program
Set the functions registered in a program as priority functions, so you can have
the machine select these functions right after the power is turned on or the {Clear
Modes} key is pressed.
To set the priority functions, register the desired settings to a program. Then, re-
call the registered program, and then press [Program as Defaults] on the Program
screen. The recalled settings are registered as priority functions.
Important
❒ Destinations and SUB/SID/SEP/PWD Code entries cannot be registered as
priority functions.
Reference
“Facsimile Features”, General Settings Guide
To Next Page
Loading...
