Getting Started
32
1
Turning Off the Main Power
Turn off the main power as follows:
Important
❒ Do not turn off the main power switch when the On indicator is lit or blink-
ing. Failure to observe this may result in damage to the hard disk or memory,
leading to malfunction.
❒ Be sure to pull out the power cord only after you have turned off the main
power switch. Not doing this may result in damage to the hard disk or mem-
ory.
A Make sure the On indicator is not lit.
B Open the switch cover, and turn off the main power switch.
The main power indicator goes off.
Note
❒ The On indicator does not go off, but blinks in direct dialing mode even if
you press the Operation switch. When this happens, check the items be-
low, and turn off the main power switch.
• the computer is not controlling the machine.
To Next Page
Loading...
