Transmission
120
1
Checking the Storage Result (Memory
Storage Report)
This report is printed after an original is stored in memory. It helps you review
the contents and the destinations of stored originals.
Important
❒ If you use Parallel Memory Transmission, the Memory Storage Report is not
printed.
Note
❒ You can turn this report on and off with the User Parameters (switch 03, bit 2)
in the Facsimile Features menu.
❒ Even if the machine is set up not to print this report, it is still printed if an orig-
inal could not be stored.
❒ You can select whether to include part of the original image on the report with
the User Parameters (switch 04, bit 7) in the Facsimile Features menu.
❒ You can select whether to display a destination with the User Parameters
(switch 04, bit 4) in the Facsimile Features menu.
❒ You can display a sender name with the User Parameters (switch 04, bit 5) in
the Facsimile Features menu.
Reference
“Facsimile Features”, General Settings Guide
To Next Page
Loading...
