12
Setting Paper on the Bypass Tray
This section gives instructions for setting paper on the bypass tray.
For details about paper size and paper type, see “Paper Size and Paper Type”,
About This Machine.
Important
❒ Paper of the following dimensions can be loaded onto the bypass tray: 100 -
305 mm (3.9 - 12 in.) vertical, and 139.7 - 600 mm (5.5 - 23.7 in.) horizontal.
❒ If 3,000Sheet-100Sheet Staple Finisher is installed, paper of the following di-
mensions can be loaded onto the bypass tray: 100 - 305 mm (3.9 - 12 in.) ver-
tical, and 139.7 - 458 mm (5.5 - 18.1 in.) horizontal.
❒ The following functions are disabled when printing from the bypass tray:
• Duplex/Booklet printing
•Auto Tray Select
•Auto Tray Switching
• Rotating Collate
• Staple (when the optional unit is installed)
• Punch (when the optional unit is installed)
• Z-fold (when the optional unit is installed)
A Open the bypass tray.
To Next Page
Loading...
