Placing Originals
16
1
Placing Originals on the Exposure Glass
Place originals on the exposure glass.
Important
❒ Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or
be damaged.
A Lift the ADF.
Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the
original might not be detected correctly.
B Place the original face down on the exposure glass. The original should be
aligned to the rear left corner.
Start with the first page to be copied.
A Positioning mark
B Scale
C Lower the ADF.
BFB009S
To Next Page
Loading...
