Other Print Operations
120
3
Notes on the Z-fold Function
Follow these precautions when using the Z-fold function.
❖ Z-folding will be canceled under the following conditions:
• When the Z-fold function is not supported for the selected paper type
• The Z-fold function is not supported for OHP transparencies, labels, thick
paper, translucent paper, and tab stock paper.
• When form feeding is used
• When the paper is fed from the optional interposer tray
• The rotating collate and auto tray switching cannot be used when Z-folding.
• When using Booklet Finisher.
Note
❒ You can Z-fold with A3, A4, B4, 11”×17”, 8
1
/
2
”×11”, and 8
1
/
2
”×14” paper.
❒ Z-folded paper can be stapled.
❒ When stapling Z-folded paper, fewer sheets than normal can be stapled to-
gether. This is because a single Z-folded sheet is equivalent to 10 non-Z-fold-
ed sheets.
❒ The Z-fold function and punch function cannot be used together. If the Z-fold
function is used, punch function settings are canceled.
The output has the following appearance:
To Next Page
Loading...
