Requesting a Reception Notice
123
2
Requesting a Reception Notice
You can confirm sent e-mail documents were properly received using e-mail or the
Journal.
The receiver sends back a reception notice message. Once the reception notice
message is received, “OK” appears in the Result column of the Journal, allowing
the originator to verify the transmission was received.
Important
❒ The Reception Notice feature is only available if the receiver supports MDN
(Message Disposition Notification).
A Place the original, and then select the scan settings you require.
B Press [TX Mode].
C Press [Reception Notice] to highlight it.
D Press [OK].
The standby display appears.
To check the settings, press [TX Mode].
E Specify a destination, and then press the {Start} key.
To Next Page
Loading...
