Ricoh Aficio MP 6000 - Using the Address Book to Specify Destinations

Transmission
76
1
Using the Address Book to Specify Destinations
When destinations are programmed in a destination list, you can specify a des-
tination by selecting a Destination key from the destination list.
The programmed name appears on Destination key.
Press [Fax] or [Internet Fax] to switch the transmission type between fax/IP-Fax
and Internet Fax.
Important
❒ In the destination list, program an individual fax number, IP-Fax destination,
e-mail address and/or groups of destinations.
A Press [Fax] or [Internet Fax] to switch the transmission type to fax/IP-Fax or
Internet Fax.
B Press the title word key where the desired destination is programmed.
For example, if you want to specify “NewYork Office” programmed in
“LMN”, press [LMN].
C Press the Destination key programmed with the desired destination.
If the desired Destination key is not shown, press [U] and [T] to look through
the list.
To cancel the selection, press the selected Destination key again. You can also
press the {Clear / Stop} key to cancel the selection.
To select more destinations, repeat steps
B
and
C
.
The destination is set and the Destination key is highlighted.
D Press the {Start} key.