Transmission
20
1
Sending multiple originals using the exposure glass
Follow these steps to send multiple originals using the exposure glass.
A Make sure [Immed. TX] is not highlighted.
B Place the first page of the original face down on the exposure glass.
C Specify a destination.
D Make the scan settings you require.
E Press the {Start} key.
The machine starts scanning.
F Place the next original on the exposure glass within 60 seconds after the ma-
chine has finished scanning the first original.
G Repeat steps
D
to
F
for all originals.
H Place the last original, and then press the {q} key.
The machine dials the destination and starts transmission.
To Next Page
Loading...
