Other Transmission Features
134
2
E Select the standard message to be stamped, and then press [OK].
The selected standard message is shown above the highlighted [Standard Message].
F Press [OK] twice.
G Specify the destination, and then press the {Start} key.
The machine cannot stamp multiple standard messages.
Note
❒ You can program one of the Quick Operation keys with operations for this
function. Using the Quick Operation key allows you to omit step
B
and
step
C
.
Reference
p.136 “Label Insertion”
“Facsimile Features”, General Settings Guide
Auto Reduce
When this function is turned on, if the receiver's paper is smaller than the size of
the original you are sending, the document is automatically reduced to fit onto
the paper available at the other end.
To Next Page
Loading...
