Sending a Stored File
221
5
A Place the original, and then select the scan settings you require.
Set “Original Orientation” correctly. If you do not, the top/bottom orienta-
tion of the original will not be displayed correctly in the preview.
B Press [Store File].
C Select [Send & Store] or [Store Only].
Select [Send & Store] to send documents after they are stored.
Select [Store Only] to store documents.
D Set the user name, file name, and password as necessary.
If you are not setting a user name, file name, or password, proceed to step
E
.
You cannot change multiple documents at once.
E Press [OK].
The file name appears to the left of [Store File].
To Next Page
Loading...
