Copying
30
2
❒ Adjust the back fence position so that the tab sheet holder will fit the tab stock.
A Select the paper tray where the tab stock is set.
B Place originals, and then press the {Start} key.
Note
❒ Check the position of the index tab to avoid cropping the image.
❒ Set the tab stock with the side to be copied facing down.
❒ Tab stock is always fed starting from the top tab.
A Originals
B Tab stock
C Copies
Reference
“Tray Paper Settings”, General Settings Guide
BFC010S
GCINDX2E
To Next Page
Loading...
