Advanced Features
109
1
I Enter a SEP Code, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
J When a password is required, press [Password (PWD)], enter the password
using the number keys, and then press [OK].
K Press [OK].
L Press the {Start} key.
Note
❒ Make sure the number of digits in the SEP Code matches the specification
of the machine from which you are receiving. For the maximum number
of digits for the SEP Code of this machine, see “Maximum Values”.
❒ You can enter numbers, p, q, and spaces.
❒ You can store SEP Codes as well as names and fax numbers in the destina-
tion list and Keystroke Programs.
❒ When a SEP Code is stored in the destination list, the SEP Code can be
modified or deleted after selecting a destination using the Destination
keys.
❒ The SEP Code is printed on lists and reports.
Reference
p.140 “SEP Code Reception”
p.266 “Registering and Changing Keystroke Programs”
p.276 “Maximum Values”
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gen-
eral Settings Guide
To Next Page
Loading...
