Canceling a Transmission
117
1
F Press [Exit] twice.
The standby display appears.
Note
❒ To delete some destinations from a broadcast, see “Deleting a Destination
from a Simultaneous Broadcast”.
❒ If you cancel a transmission while the file is being sent, some pages of your
file may have already been sent and is received at the other end.
❒ If the transmission finishes while you are carrying out this procedure,
transmission cannot be canceled.
❒ If multiple destinations were specified, only the number of the destina-
tions that have not received the document you sent is shown.
❒ If multiple destinations were specified, only one destination number ap-
pears. To display all destinations, press [Check / Change Settings].
Reference
p.174 “Deleting a Destination from a Simultaneous Broadcast”
To Next Page
Loading...
