Confirming Transmission Results by E-mail
127
2
D Select the destination of notification, and then press [OK].
If you make a mistake, before pressing [OK], press [Clear] or press the selected
Destination key again to turn the highlight off.
[E-mail TX Results] gets highlighted and the destination of notification selected
appears.
E Press [OK].
The standby display appears.
To check the settings, press [TX Mode].
F Specify a destination, and then press the {Start} key.
Note
❒ You can program one of the Quick Operation keys with operations for this
function. Using the Quick Operation key allows you to omit step
B
.
Reference
“Facsimile Features”, General Settings Guide
To Next Page
Loading...
Need help?
General
