Changing the Settings of Files in Memory
177
4
D Press [Check / Change Settings].
E Press [Add Destination].
F Specify the destination using the number keys or Destination keys, and
then press [OK].
You can switch the transmission type between fax/IP-Fax and Internet Fax by
pressing [Fax] or [Internet Fax].
To add an e-mail address, switch the type of transmission to Internet Fax by
pressing [Internet Fax]. Then, press [Manual Entry] and enter the e-mail address.
You can also program a SUB Code or SEP Code by pressing [Adv.Features].
G Press [Exit].
Repeat from step
C
, if you want to add another destination.
H Press [Exit] twice.
The standby display appears.
To Next Page
Loading...
