Slip Sheet
117
3
Note
❒ Collate cannot be set when using slip sheets.
❒ When the duplex printing or cover printing is set, you cannot insert slip sheets.
❒ The slip sheet should be the same size and orientation as the main paper.
❒ If “Auto Tray Select” has been set as the paper feed tray for the body paper,
the paper will be delivered from a tray containing paper in K orientation.
Therefore, when the cover paper has been set to L orientation, the orienta-
tion of the output cover paper and body paper will be different.
❒ The same paper feed tray cannot be set for the main paper and slip sheets.
To Next Page
Loading...
Need help?
General
