6. Press the [ ] or [ ] key to enter the vertical value, and then press the [ Enter] key.
You can set the vertical value in the following range: 139.7 mm - 432 mm (5.50 -17.00 inches).
7. Press the [Menu] key.
The initial screen appears.
• The printer driver Help
Specifying a paper type for the Bypass Tray
You can improve the printer's performance by specifying the type of paper that you are placing on the
Bypass Tray. You can select one of the following paper types:
• Plain Paper, Recycled Paper, Special Paper, Color Paper, Letterhead, Transparency (OHP
transparency), Envelope, Preprinted, Thick Paper
You can select custom paper type settings made using Web Image Monitor.
• Be sure to select the paper type when you load thick paper, envelopes, or OHP transparencies in the
Bypass Tray.
• The paper type selected using the printer driver overrides that selected using the control panel.
• Be sure to set a paper type using the control panel of the printer as the following procedure. If you
set a paper type only by the printer driver, printing result might not be appropriate.
5. Paper and Other Media
110
To Next Page
Loading...
Need help?
General
